
3
-
Way Active
Line Array Module
3
-
Way Active
Line Array Module
17
Technical Data
Speaker Type: 3-Way Active Line Array Module
Acoustical data
Frequency Response [+/- 3dB]: 80 - 19.000 Hz
Max SPL: One Unit: 128 dB
HF: 2x1 “
Voice Coil HF: 1.4 “
Directivity: 100x15 ° Single unit
MF: 1x 6.5 “
Voice Coil MF: 1.5 “
LF: 8 “
Voice Coil LF: 2.5 “
Amplifier
Amp Technology: Digipro®
Amp Class: Class D
HF Amp: 100 W RMS
MF Amp: 100 W RMS
LF Amp: 220 W RMS
Cooling: Convection
Processor
Controller: Analog Devices
AD/DA Converter: DSP 24 bit/48 kHz
System Presets: 8, HF/Low-mid correction
Limiter: Dual Active Limiter Multiband RMS,
Peak, Thermal
Crossover Frequency MF-HF: 1800 Hz
Slope MF-HF: 24 dB/Octave
Crossover Frequency LF-MF: 400 Hz
Slope LF-MF: 24 dB/Octave
Input
Signal Input: 1x XLR fem, sym
Signal Output: 1x XLR male, sym.
Power Socket: 1x Powercon In 1x Powercon Out
Voltage Range: 90 - 240 V
Mechanics
Housing: Polypropylen PP reinforced
Housing Design: Trapezoidal 15°
Rigging Points: Integrated rigging hardware
Width: 580 mm (23.2 in)
Height: 240 mm (9.6 in)
Depth: 327 mm (13.08 in)
Weight: 13.8 kg (30.42 lbs)
DVA T4
The DVA T4 is equipped with unique digital power amps that
provide a total of 420W RMS. Driven by Digipro® technology,
their resolution is several-fold that of conventional digital amps.
They render signals very accurately with this high-definition audio
capability.
Sonic images are almost impossible to distinguish from those of
analog sources, even in the HF range. The amps are equipped with
high-quality delta-sigma converters.
The DVA T4‘s digital power amp features DPP™ (Digital Power
Processing) technology and a multiband compressor/ limiter with
separate response curves for each signal path. Its dynamic range is
exceptionally wide.
For example, headroom in the middle and high-frequency bands
ranges up to 22dB. This innovative circuitry not only maximizes
dynamic response, it also ensures signals are rendered accurately and
uniformly even at threshold levels.
Commentaires sur ces manuels